Easy Guide to Installing Computer Memory

Computer Computer Hardware Easy Guide to Installing Computer Memory

Easy Guide to Installing Computer Memory

Some people had the forethought to take a class in computer maintenance around the same time they bought their computers; others just have a natural gift for knowing what to do to improve the performance of their PC. The rest of the population falls in the clueless category. For them, the basics beyond knowing how to turn the computer on and off are about as complex as it gets. Fortunately, the process for installing more memory into your computer isn't all that hard. It doesn't take a lot of time and it's a fairly foolproof job.

There are a few key, essential pieces of information you should have before you begin upgrading your computer's memory. The first thing is to check with your computer knowledgeable buddy down the street or in the computer's owner manual for the type of memory stick your system will need. The computer maker's website or customer service phone lines are other good places to check for this information. It is important to be aware that the make and model of your computer's motherboard is dependent on the type of memory you will need to purchase. The next thing is to be sure that memory is indeed what the computer needs. Sluggish operations and problems with screen displays are two ways you can be sure your system needs a little memory boost.

Now that you have the type of memory you need, your palms are sweaty, and you are sure that the computer police are going to come after you for PC abuse, it's time to begin. The first step is relatively simple. Turn off your computer. See, everything is going fine so far. Unplug the power cord. The next thing you should do is to determine how your computer opens. Some are made with a button or lever designed to pop open the compartment where all the computer magic happens. Others require that you unscrew a few screws to access the working insides of your system. Once you have the case opened, just slide the casing back for working access to your computer and the motherboard.
The next thing you need to do is locate the memory slots in the computer. They are fairly easy to see. You already know what the memory sticks look like. The only thing you need to do is look for a place they look like they would fit. In some cases, wires may be covering the correct location. Gently push wires out of the way until you find the right spot. Be sure to be gentle so you don't pull any wires out or loose. You don't want to install the memory correctly and then have problems because of a loose or disconnected wire.

As long as you are trying to install the memory in the right place, it will easily go into place. Don't try to force it. Realign the slots and try again. Once you have the correct alignment, push down on the memory stick on both sides. It will click into place and you should push the clamps down on both sides. This process helps to make sure the memory is fully engaged with the motherboard.

The only thing you have left to do is close the case back up and replace the screws if necessary. Plug the power cord back in are restart the computer. It is pretty easy to install more memory, but there is always the possibility of error. Your computer will let you know if there is a problem. When you restart your computer the system will beep to tell you the memory is improperly installed. Simply start again and realign the memory stick. Don't worry; things will work out just fine.

Since you have read this article might want to see this site, which provides an opportunity to profit $25 to $100 per hour.
https://www.moreinfo247.com/9206272/Free
Article By: Grant Eckert
Views: 982

Comments On Easy Guide to Installing Computer Memory0

Your Comment
Your Name
Your Email

Your Email will not be shown with your comment

Secret Number
43280

Please type the numbers shown above into the Secret Number box.